Dell POWEREDGE M1000E - Manual (Page 163)

Fabric OS Message Reference 141
53-1002749-01
ANV-1004
5
ANV-1004
Message S,C: Invalid DMA ch pointer, chan:,
good_addr:0x bad_addr:0x.
Message Type LOG
Severity ERROR
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may degrade
the data traffic.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the blade.
ANV-1005
Message S,C,A: Memory allocation failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates memory allocation failure in the software.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the switch or contact
your switch service provider.
ANV-1006
Message
S,C: HW ASIC Chip fault. Type = 0x,
Error = .
Message Type LOG
Severity CRITICAL
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that renders the
chip as not operational.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the blade.