Dell POWEREDGE M1000E - Manual (Page 216)

194 Fabric OS Message Reference
53-1002749-01
C3-1001
5
C3 Messages
C3-1001
Message Port failed due to SFP validation failure. Check if the SFP is valid
for the configuration.
Message Type LOG
Severity ERROR
Probable Cause Indicates a deteriorated small form-factor pluggable (SFP) transceiver, an incompatible SFP transceiver
pair, or a faulty cable between the peer ports.
Recommended
Action
Verify that compatible SFP transceivers are used on the peer ports, the SFP transceivers have not
deteriorated, and the Fibre Channel cable is not faulty. Replace the SFP transceivers or the cable if
necessary.
C3-1002
Message Port chip failed due to an internal error.
Message Type LOG | FFDC
Severity ERROR
Probable Cause Indicates an internal error. All the ports on the blade or switch will be disrupted.
Recommended
Action
To recover a bladed system, execute the slotPowerOff and slotPowerOn commands on the blade. To
recover a non-bladed system, execute the fastBoot command on the switch.
C3-1004
Message S,C: Invalid DMA ch pointer, chan:,
good_addr:0x bad_addr:0x.
Message Type LOG
Severity ERROR
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may degrade
the data traffic.
Recommended
Action
Reboot the system at the next maintenance window. If the problem persists, replace the blade.