Dell POWEREDGE M1000E - Manual (Page 869)

Fabric OS Message Reference 847
53-1002749-01
SWCH-1013
5
SWCH-1013
Message Trunk Area has been disabled for one or more ports.
Message Type AUDIT | LOG
Class CFG
Severity INFO
Probable Cause Indicates that a Trunk Area assignment has been disabled for one or more ports and the configuration file
has been updated.
Recommended
Action
No action is required.
SWCH-1014
Message All Trunk Areas have been disabled.
Message Type AUDIT | LOG
Class CFG
Severity INFO
Probable Cause Indicates that all Trunk Areas have been disabled and the configuration file has been updated.
Recommended
Action
No action is required.
SWCH-1015
Message .
Message Type LOG
Severity WARNING
Probable Cause Indicates that an internal problem has been detected by the software. This is usually an internal Fabric
OS problem or due to file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, execute the firmwareDownload command to update the firmware.