Dell POWEREDGE M1000E - Manual (Page 536)

514 Fabric OS Message Reference
53-1002749-01
FW-1379
5
FW-1379
Message , is between high and low boundaries(High=, Low=).
Current value is .
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of illegal commands has changed from a value outside of the acceptable range
to a value within the acceptable range. This counter tracks how many times commands allowed only on
the primary fabric configuration server (FCS) switch have been executed on a non-primary FCS switch.
There are many commands that can be executed only on the primary FCS switch, as well as one security
command that can be executed only on a backup FCS switch. The counter increments every time
someone issues one of these commands on a switch where it is not allowed.
Recommended
Action
No action is required.
FW-1400
Message , value has changed(High=, Low=). Current value is
.
Message Type LOG
Severity INFO
Probable Cause Indicates that the flash memory usage percentage has changed. Flash memory increases and
decreases slightly with normal operation of the switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1401
Message
, is below low boundary(High=, Low=). Current value
is .
Message Type LOG
Severity INFO
Probable Cause Indicates that the flash memory usage percentage has fallen below the low boundary. Flash memory
increases and decreases slightly with normal operation of the switch.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.