Dell POWEREDGE M1000E - Manual (Page 634)

612 Fabric OS Message Reference
53-1002749-01
MFIC-1003
5
Recommended
Action
IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with
the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is for
information purposes only, and no action is required. IDID mode can be set using the configure
command in the CLI or checking the Advanced Web Tools Switch Admin > Configure > Fabric >
Insistent Domain ID Mode check box. The switch must be disabled to change the IDID mode.