Dell POWEREDGE M1000E - Manual (Page 734)

712 Fabric OS Message Reference
53-1002749-01
SEC-1096
5
SEC-1096
Message Failed to delete because .
Message Type LOG
Severity ERROR
Probable Cause Indicates a policy cannot be removed because deleting it would result in an invalid security policy
configuration.
Recommended
Action
Verify the security policy configuration requirements and remove any policies that require the policy you
want to be removed first.
SEC-1097
Message Cannot find policy set.
Message Type LOG
Severity ERROR
Probable Cause Indicates the specified policy could not be found.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
SEC-1098
Message No FCS list.
Message Type LOG
Severity ERROR
Probable Cause Indicates the specified policy could not be found.
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.