Dell POWEREDGE M1000E - Manual (Page 485)

Fabric OS Message Reference 463
53-1002749-01
FW-1170
5
FW-1170
Message , is above high boundary(High=, Low=).
Current value is .
Message Type LOG
Severity WARNING
Probable Cause Indicates that the number of signal losses that the port experiences has risen above the high boundary.
Loss of signal generally indicates a physical problem.
Recommended
Action
Check both ends of your cable connection. Verify that the cable is not faulty.
FW-1171
Message , is between high and low boundaries(High=,
Low=). Current value is .
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of signal losses that the port experiences has changed from a value outside of
the acceptable range to a value within the acceptable range. Frequent loss of signal generally indicates a
physical problem.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs)
are not faulty.
FW-1172
Message , value has changed(High=, Low=).
Current value is .
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of protocol errors that the port experiences has changed. Occasional protocol
errors occur due to software glitches. Persistent protocol errors occur due to hardware problems.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs)
are not faulty.