Ss messages, Ss-1000, Ss-1001 – Dell POWEREDGE M1000E User Manual
Page 827: Ss-1002
Fabric OS Message Reference
805
53-1002749-01
SS-1000
5
SS Messages
SS-1000
Message
supportSave has uploaded support information to the host with IP address
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the supportSave command was used to transfer support information to a remote location.
Recommended
Action
No action is required.
SS-1001
Message
supportSave's upload operation to host IP address
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a file copy error occurred during execution of the supportSave command. Complete error
information cannot always be displayed in this message because of possible errors in subcommands
being executed by the supportSave command.
Recommended
Action
Check and correct the remote server settings and configuration. Execute the supportFtp command (as
needed) to set the FTP or SCP parameters. After the problem is corrected, execute the supportSave
command again.
SS-1002
Message
supportSave has stored support information to the USB storage device.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the supportSave command was used to transfer support information to an attached USB
storage device.
Recommended
Action
No action is required.