Dell POWEREDGE M1000E - Manual (Page 386)

364 Fabric OS Message Reference
53-1002749-01
FCR-1069
5
FCR-1069
Message The FC Routing service is enabled.
Message Type LOG
Severity INFO
Probable Cause Indicates that the FC Routing service is enabled. This is caused by the fosConfig –-enable fcr or the
configDownload command with the fcrState set to 1 (enabled). Note that the FC Routing service is
disabled by the factory.
Recommended
Action
No action is required.
FCR-1070
Message The FC Routing configuration is set to default.
Message Type LOG
Severity INFO
Probable Cause Indicates that the FC Routing configuration is set to the default by the user. This removes all prior FC
Routing configurations.
Recommended
Action
No action is required.
FCR-1071
Message Port is changed from non FCR port to FCR port.
Message Type LOG
Severity INFO
Probable Cause Indicates that the port became an EX_Port or VEX_Port.
Recommended
Action
No action is required.