Dell POWEREDGE M1000E - Manual (Page 925)

Fabric OS Message Reference 903
53-1002749-01
ZONE-1059
5
ZONE-1059
Message Unexpected TI routing behavior or a potentially unroutable TI configuration has
been detected on local domain error was detected>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the current fabric topology and TI zone configuration may result in an unroutable condition
or an unexpected routing behavior.
Recommended
Action
Execute the zone --showTIerrors command on the specified switch to report the conflicting
configuration details.
ZONE-1060
Message Non-TI and TI failover-enabled traffic restricted to domain due to TI
failover-disabled zoning.
Message Type LOG
Severity WARNING
Probable Cause Indicates that only TI failover-disabled paths remain to reach the specified domain causing non-TI and TI
failover traffic disruption.
Recommended
Action
Add or restore the non-TI or TI failover-enabled inter-switch links (ISLs) to the specified domain.
ZONE-1061
Message Some trunk members are missing from failover disabled active TI zones.
Message Type LOG
Severity WARNING
Probable Cause Indicates that some members in the trunk group are not added to the failover-disabled TI zone. This will
result in traffic disruption if the trunk member goes down.
Recommended
Action
If any trunk member is included in the TI failover-disabled zone path, then always add all members from
that group. Execute the zone --showTItrunkerrors command on the switch to find the missing trunk
members in the TI zone.