Dell POWEREDGE M1000E - Manual (Page 870)

848 Fabric OS Message Reference
53-1002749-01
SWCH-1016
5
SWCH-1016
Message Device FDISC to port . Static persistent PID set
and area requested not assigned to the device. Reject FDISC.
Message Type LOG
Severity INFO
Probable Cause Indicates that the static persistent port ID (PID) is set and the area requested is not assigned to the
device.
Recommended
Action
This is an N_Port ID virtualization (NPIV) device and the static persistent PID is set on it, though the area
cannot be assigned as requested. Remove the static binding to have the device come up with a different
area by using the wwnaddress --unbind command.
SWCH-1017
Message Device tries to FLOGI to port , reject FLOGI as
persistent PID is set on the Loop device.
Message Type LOG
Severity INFO
Probable Cause Indicates persistent port ID (PID) is set and static persistent PID is not supported on loop device.
Recommended
Action
Remove the WWN-PID binding using the wwnaddress --unbind command and re-enable the port.
SWCH-1018
Message Device FLOGI to port , Static persistent PID
set, Requested area user bound to another port. Reject FLOGI.
Message Type LOG
Severity INFO
Probable Cause Indicates a WWN-PID and port address binding collision.
Recommended
Action
The persistent PID is set on the device and the requested area cannot be assigned because it is user
bound to a different port. Remove the WWN-PID binding using the wwnaddress --unbind command or
remove the port address binding using the portaddress --unbind command and then re-enable the port.