Dell POWEREDGE M1000E - Manual (Page 220)

198 Fabric OS Message Reference
53-1002749-01
C3-1015
5
C3-1015
Message Port re-initialized due to Link Reset failure on internal Port Snumber>,P().
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified port is re-initialized due to link reset failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
C3-1016
Message Port is faulted due to port re-initialization failure on internal Port Snumber>,P() with reason .
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified port failed due to port re-initialization failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
C3-1017
Message
Blade in Slot- failed due to unavailability of ports in the internal
trunk.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the specified blade failed because of the unavailability of the ports in the internal trunk.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.