Dell POWEREDGE M1000E - Manual (Page 807)

Fabric OS Message Reference 785
53-1002749-01
SPC-3003
5
SPC-3003
Message S, : No output KEK for DEK
rewrap, DEK: , KEK: octet 1> .
Message Type LOG
Severity ERROR
Probable Cause Indicates the output wrapping key encryption key (KEK) for the data encryption key (DEK) to be
rewrapped does not exist within the encryption engine CryptoModule.
Recommended
Action
No action is required. The KEK will be recovered automatically.
SPC-3004
Message S, : No output KEK for DEK
create, KEK: .
Message Type LOG
Severity ERROR
Probable Cause Indicates the output wrapping key encryption key (KEK) for the data encryption key (DEK) to be created
does not exist within the encryption engine CryptoModule.
Recommended
Action
For opaque key vaults such as DPM, recover the missing master key to the current or alternate position.
SPC-3005
Message S, : DEK inject error: status code>, DEK: octet 4>.
Message Type LOG
Severity ERROR
Probable Cause Indicates an error in injecting data encryption key (DEK) into encryption engine. The SP status code
variable specifies the cause of the error:
• 14 - Invalid input DEK format
• 32 - DEK could not be unwrapped
• 33 - FGPA error upon inject
• 73 - Invalid key encryption key (KEK) format
Recommended
Action
Contact your switch service provider for assistance.