Dell POWEREDGE M1000E - Manual (Page 343)

Fabric OS Message Reference 321
53-1002749-01
FABS-1001
5
FABS Messages
FABS-1001
Message .
Message Type FFDC | LOG
Severity CRITICAL
Probable Cause Indicates that the system is low on memory and cannot allocate more memory for new operations. This is
usually an internal Fabric OS problem or file corruption. The Description of memory need variable
specifies the memory size that was being requested. The value can be any whole number.
Recommended
Action
Reboot or power cycle the switch.
FABS-1002
Message .
Message Type LOG
Severity WARNING
Probable Cause Indicates that an internal problem has been detected by the software. This is usually an internal Fabric
OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
FABS-1004
Message process (command name>) .
Message Type LOG
Severity WARNING
Probable Cause Indicates that an operation has been interrupted by a signal. This is usually an internal Fabric OS
problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.