Dell POWEREDGE M1000E - Manual (Page 335)

Fabric OS Message Reference 313
53-1002749-01
FABR-1031
5
Recommended
Action
No action is required.
FABR-1031
Message Maximum number of retries sending ILS from port exceeded.
Message Type LOG | FFDC
Severity WARNING
Probable Cause Indicates the fabric exhausted the maximum number of retries sending internal link service (ILS) to the
iswitch daemon on the specified E_Port.
Recommended
Action
Run the top command to see if iswitchd is extremely busy or if another process is using excessive CPU
resources.
FABR-1032
Message Remote switch with domain ID and switchname running an
unsupported FOS version v2.x has joined the fabric.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a switch with an unsupported Fabric OS version 2.x has joined the fabric.
Recommended
Action
Remove the switch with the unsupported Fabric OS version 2.x from the fabric
FABR-1034
Message Area have been acquired by port has already acquired the area>. Persistently disabling port disabled>.
Message Type LOG
Severity INFO
Probable Cause Indicates you must enable Trunk Area on a port for another port to use the same area.
Recommended
Action
Move the cable to a port area that is not in use, or disable Trunk Area. You must manually enable the port
or the port remains disabled forever.
Refer to the Fabric OS Administrator's Guide for more information.