Dell POWEREDGE M1000E - Manual (Page 650)

628 Fabric OS Message Reference
53-1002749-01
NBFS-1003
5
NBFS-1003
Message DB_XMIT_SET flag not set in state , input , port
.
Message Type LOG
Severity WARNING
Probable Cause Indicates the database transmit set flag was not set for the specified input state on the specified port.
Neighbor finite state machine (NBFSM) states are as follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
Recommended
Action
No action is required. The Fabric OS automatically recovers from this problem.
NBFS-1004
Message
Wrong input: to neighbor FSM, state , port
.
Message Type LOG
Severity INFO
Probable Cause Indicates the wrong input was sent to the neighbor finite state machine (NBFSM). NBFSM states are as
follows:
• 0 - Down
• 1 - Init
• 2 - Database Exchange
• 3 - Database Acknowledge Wait
• 4 - Database Wait
• 5 - Full
If this error occurs repeatedly, then there is a problem in the protocol implementation between two
switches.
Recommended
Action
Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is
Full, then this message can safely be ignored. Otherwise, run the portDisable and portEnable
commands to refresh the port.