Dell POWEREDGE M1000E - Manual (Page 850)

828 Fabric OS Message Reference
53-1002749-01
SULB-1009
5
"Sanity check failed because HAMD is disabled on active CP." 0x34
"Sanity check failed because firmware download process is already in progress." 0x35
"Sanity check failed because Fabric OS is disabled on standby CP." 0x36
"Sanity check failed because HAMD is disabled on standby CP." 0x37
"Firmware download failed on standby CP." 0x40
"Firmware download failed on standby CP." 0x41
"Firmware download failed on standby CP." 0x42
"Firmware commit failed on standby CP." 0x43
"Firmware download failed." 0x44
"Firmware download failed due to IPC error." 0x50
"Unable to check the firmware version on standby CP due to IPC error." 0x51
"Firmware download failed due to IPC error." 0x52
"Firmware download failed due to IPC error." 0x53
"Standby CP failed to reboot due to IPC error." 0x54
"Firmware commit operation failed due to IPC error." 0x55
"Unable to check the firmware version on standby CP due to IPC error." 0x56
"Unable to restore the original firmware due to standby CP timeout." 0x57
"Standby CP failed to reboot and was not responding." 0x58
"Unable to check the firmware version on standby CP due to IPC error." 0x59
"Sanity check failed because the firmware download operation is already in
progress." 0x60
"Sanity check failed because the firmware download operation is already in
progress." 0x61
NOT USED 0x62
"System error." 0x63
"Active CP forced failover succeeded. Now the standby CP becomes active CP." 0x64
"Standby CP booted up." 0x65
"Active and standby CP failed to gain HA synchronization within 10 minutes." 0x66
"Standby CP rebooted successfully." 0x67
"Standby CP failed to reboot." 0x68
"Firmware commit has started to restore the secondary partition." 0x69
"Local CP is restoring its secondary partition." 0x6a
"Unable to restore the secondary partition. Run the firmwareDownloadStatus
and firmwareShow commands to see firmware status."
0x6b
"Firmware download has started on standby CP. It might take up to 10 minutes." 0x6c
"Firmware download has completed successfully on standby CP." 0x6d
"Standby CP reboots." 0x6e
TABLE 7 Status messages and status codes (Continued)
Status message Status code