Dell POWEREDGE M1000E - Manual (Page 352)

330 Fabric OS Message Reference
53-1002749-01
FCOE-1009
5
Recommended
Action
Check the IfIndex limit displayed in the message.
FCOE-1009
Message Addition of N_Port mapping failed. Max N_Port mapping limit reached: .
Message Type LOG
Severity INFO
Probable Cause Indicates that the N_Port mapping has reached its maximum limit.
Recommended
Action
Remove unwanted N_Port mappings using the fcoelogingroup --remove command and try adding
N_Port mapping using the fcoelogingroup --add command.
FCOE-1010
Message
FSS Registration or FCoE Trace initialization failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the Fabric OS state synchronization (FSS) registration or initialization of the FCoE trace
has failed.
Recommended
Action
Execute the supportSave command and restart the system. If the problem persists, contact your switch
service provider.
FCOE-1012
Message
Request to delete port from VLAN failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a request to delete ports from the specified VLAN has failed.
Recommended
Action
Execute the supportSave command and restart the system. If the problem persists, contact your switch
service provider.