Auth messages, Auth-1001, Auth-1002 – Dell POWEREDGE M1000E User Manual
Page 166: Auth-1003
144
Fabric OS Message Reference
53-1002749-01
AUTH-1001
5
AUTH Messages
AUTH-1001
Message
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the secret database operation has been updated using the secAuthSecret command. The
values for Operation type can be "set" or "remove".
Recommended
Action
No action is required.
AUTH-1002
Message
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified action has failed to update the secret database using the secAuthSecret
command. The values for Operation type can be "set" or "remove".
Recommended
Action
Execute the secAuthSecret command again.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1003
Message
type has been successfully set to
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that an authentication configuration value was set to a specified value. The data type is
authentication type, DH group type, hash type, or policy type.
Recommended
Action
No action is required.