Dell POWEREDGE M1000E - Manual (Page 165)

Fabric OS Message Reference 143
53-1002749-01
ANV-1016
5
ANV-1016
Message Port is faulted due to port reinitialization failure on internal port Snumber>,P() with reason .
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified port is faulted due to port re-initialization failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
ANV-1028
Message Detected excessive Link resets on the port in a second. Slot , Port
().
Message Type LOG
Severity WARNING
Probable Cause Indicates that the port received excessive link resets from peer port within 1 second and that exceeded
threshold.
Recommended
Action
When this error is observed persistently, change the small form-factor pluggable (SFP) transceiver or the
cable on the peer port to which this port is connected.