Dell POWEREDGE M1000E - Manual (Page 429)

Fabric OS Message Reference 407
53-1002749-01
FICN-1100
5
FICN-1100
Message HostTeraIng:FICON Selective Reset:Path=0xDeviceDomain> Elapsed Time=seconds since the last IO started for this device>.since the last IO started for this device> seconds.
Message Type LOG
Severity ERROR
Probable Cause Indicates that protocol errors in emulation in the Control Unit or network errors can cause Selective
Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1101
Message HostTeraIng:FICON Purge received:Path=0xDeviceDomain>.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during the path recovery.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1102
Message
HostTeraIng:LRJ received on Path=0xDeviceDomain> lastCmds=0xreceived from the channel for this device> lastStatus=0xpresented to the channel for this device> treating as system reset event.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel believes that it no
longer has a path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.