Dell POWEREDGE M1000E - Manual (Page 600)

578 Fabric OS Message Reference
53-1002749-01
ISNS-1001
5
ISNS Messages
ISNS-1001
Message Configuration peering with external iSNS server address> slot/port /ge (current
/ge).
Message Type LOG
Severity INFO
Probable Cause Indicates that a user has issued the isnscCfg command.
Recommended
Action
No action is required.
ISNS-1002
Message
Start peering with external iSNS server slot/port number>/ge.
Message Type LOG
Severity INFO
Probable Cause Indicates that peering has started with the specified external Internet Storage Name Service (iSNS)
server.
Recommended
Action
No action is required.
ISNS-1003
Message Peering with external iSNS server is disabled.
Message Type LOG
Severity INFO
Probable Cause Indicates that the IP address of the Internet Storage Name Service (iSNS) server is zero. Therefore,
peering is disabled.
Recommended
Action
If you wish to enable the iSNS server, use the isnscCfg command to show or set the server IP address;
otherwise, no action is required.