Dell POWEREDGE M1000E - Manual (Page 435)

Fabric OS Message Reference 413
53-1002749-01
FICN-1118
5
FICN-1118
Message HostPrintIng::FICON Selective Reset:Path=0xDeviceDomain> state=0xstate for this device> LastCmds=0xfor this device> LastStatus=0xfor this device>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1119
Message HostPrintIng:FICON Selective Reset:Path=0xDeviceDomain> Elapsed Time=seconds since the last IO started for this device>.since the last IO started for this device> seconds.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the channel recognized a timeout condition and issued a Selective Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1120
Message HostPrintIng:FICON Purge received:Path=0xDeviceDomain>.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during FICON path recovery.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.