Dell POWEREDGE M1000E - Manual (Page 686)

664 Fabric OS Message Reference
53-1002749-01
PSWP-1001
5
PSWP Messages
PSWP-1001
Message PID for port and port corresponding to destination port> are swapped. New PID for port corresponding to source port> is 0x
and port is 0xdestination wwn>.
Message Type LOG
Severity INFO
Probable Cause Indicates the portSwap command has been issued.
Recommended
Action
No action is required.
PSWP-1002
Message Port Swap feature enabled.
Message Type LOG
Severity INFO
Probable Cause Indicates the port swap feature has been enabled in the switch.
Recommended
Action
No action is required.
PSWP-1003
Message
Port Swap feature disabled.
Message Type LOG
Severity INFO
Probable Cause Indicates the port swap feature has been disabled in the switch.
Recommended
Action
No action is required.