Dell POWEREDGE M1000E - Manual (Page 353)

Fabric OS Message Reference 331
53-1002749-01
FCOE-1014
5
FCOE-1014
Message Request to add ports to VLAN failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a request to add ports to the specified VLAN has failed.
Recommended
Action
Execute the supportSave command and restart the system. If the problem persists, contact your switch
service provider.
FCOE-1015
Message Request to add MACs to Layer 2 for ifindex 0x failed, rc:.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a request to add MAC entries to Layer 2 for the specified slot or port has failed.
Recommended
Action
Check the reason code for the failure and contact your switch service provider for assistance.
FCOE-1016
Message
Request to delete VLAN failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates a request to delete the specified VLAN has failed because the VLAN may be in use.
Recommended
Action
Disable the active FCoE login session using the no fcoe command and try deleting the VLAN again.
FCOE-1017
Message Request to add FCMAP failed for VLAN .
Message Type LOG
Severity ERROR
Probable Cause Indicates that a request to add FCMAP has failed. When the VLAN is in use, its FCMAP cannot be
modified.