Sec-1339, Sec-3001, Sec-3002 – Dell POWEREDGE M1000E User Manual
Page 774

752
Fabric OS Message Reference
53-1002749-01
SEC-1339
5
SEC-1339
Message
Distribute command failed. There are Inflight encryption enabled switch(s) in
fabric. Auth db(s) distribution is blocked
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates there was an attempt to distribute AUTH databases with switch policy (Off/Passive) from the
fabric to a switch that has Inflight Encryption enabled
Recommended
Action
Disable or enable Inflight encryption in all the switches in the fabric
SEC-3001
Message
Event:
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the security mode of the fabric was either enabled or disabled.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3002
Message
Event:
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified security event has occurred. The event can be one of the following:
•
There has been a fabric configuration server (FCS) failover.
•
A security policy has been activated.
•
A security policy has been saved.
•
A security policy has been aborted.
•
A non-FCS password has changed.