Dell POWEREDGE M1000E - Manual (Page 569)

Fabric OS Message Reference 547
53-1002749-01
HAMK-1004
5
HAMK-1004
Message Resetting standby CP (double reset may occur).
Message Type LOG
Severity INFO
Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. Typically, this
message is displayed when the standby CP has been restarted. Note that in certain circumstances, a CP
may experience a double reset and restart twice. A CP can recover automatically even if it has restarted
twice.
Recommended
Action
No action is required.