Dell POWEREDGE M1000E - Manual (Page 476)

454 Fabric OS Message Reference
53-1002749-01
FW-1126
5
• Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1126
Message , is below low boundary(High=, Low=). Current value
is .
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of segmentations has fallen below the low boundary. Segmentation changes
might occur due to the following reasons:
• Zone conflicts.
• Domain conflicts.
• Segmentation of the principal link between two switches.
• Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
A low number of segmentation errors means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1127
Message , is above high boundary(High=, Low=). Current value
is .
Message Type LOG
Severity INFO
Probable Cause Indicates that the number of segmentations has risen above the high boundary. Segmentation changes
might occur due to the following reasons:
• Zone conflicts.
• Domain conflicts.
• Segmentation of the principal link between two switches.
• Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.