Fabr-1018, Fabr-1019, Fabr-1020 – Dell POWEREDGE M1000E User Manual
Page 332
310
Fabric OS Message Reference
53-1002749-01
FABR-1018
5
FABR-1018
Message
PSS principal failed (
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a failure occurred when trying to set the principal switch using the fabricPrincipal
command. The message notifies you that the switch failed to become the principal switch because of one
of the following reasons:
•
The switch joined an existing fabric and bypassed the F0 state.
•
The fabric already contains a principal switch that has a lower World Wide Name (WWN).
Recommended
Action
Make sure that no other switch is configured as the principal switch. Force a fabric rebuild by using the
switchDisable and switchEnable commands.
Refer to the Fabric OS Command Reference for more information about the fabricPrincipal command.
FABR-1019
Message
Critical fabric size (
(
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that this switch is a value-line switch and has exceeded the limited fabric size: that is, a
specified limit to the number of domains. This limit is defined by your specific value-line license key. The
fabric size has exceeded this specified limit, and the grace period counter has started. If the grace period
is complete and the size of the fabric is still outside the specified limit, Web Tools is disabled.
Recommended
Action
Bring the fabric size within the licensed limits. Either a full fabric license must be added or the size of the
fabric must be changed to within the licensed limit. Contact your switch provider to obtain a full fabric
license.
FABR-1020
Message
Web Tools will be disabled in
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that this switch has a value-line license and has a limited number of domains. If more than the
specified number of domains are in the fabric, a counter is started to disable Web Tools. This message
displays the number of days left in the grace period. After this time, Web Tools is disabled.