Dell POWEREDGE M1000E - Manual (Page 304)

282 Fabric OS Message Reference
53-1002749-01
EM-1014
5
EM-1014
Message Unable to read sensor on ().
Message Type LOG
Severity ERROR
Probable Cause Indicates that the environmental monitor (EM) was unable to access the sensors on the specified
field-replaceable unit (FRU).
Recommended
Action
Reseat the FRU. If the problem persists, replace the FRU.
EM-1015
Message Warm recovery failed ().
Message Type LOG
Severity WARNING
Probable Cause Indicates that a problem was discovered when performing consistency checks during a warm boot.
Recommended
Action
Monitor the switch. If the problem persists, restart or power cycle the switch.
EM-1016
Message Cold recovery failed ().
Message Type LOG
Severity WARNING
Probable Cause Indicates that a problem was discovered when performing consistency checks during a cold boot.
Recommended
Action
Monitor the switch.
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.