Dell POWEREDGE M1000E - Manual (Page 212)

190 Fabric OS Message Reference
53-1002749-01
C2-1013
5
C2-1013
Message S,P(): Duplicate rte_tbl_select
detected.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the selected table is corrupted.
Recommended
Action
This message must have a matching message for the other duplicate table. Reset both the specified
ports. If it is a trunk, reset the entire trunk.
C2-1014
Message Link Reset on Port S,P() vc_no=number> crd(s)lost= trigger.
Message Type LOG
Severity WARNING
Probable Cause Indicates that one or more credits are lost and the link is reset.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.
C2-1015
Message
Port re-initialized due to Link Reset failure on internal Port Snumber>,P().
Message Type LOG
Severity WARNING
Probable Cause Indicates that the specified port is re-initialized due to link reset failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.