Dell POWEREDGE M1000E - Manual (Page 347)

Fabric OS Message Reference 325
53-1002749-01
FABS-1014
5
FABS-1014
Message []:Unknown FRU type 0x.
Message Type LOG
Severity ERROR
Probable Cause Indicates an unrecognized type of field-replaceable unit (FRU) has been discovered in the system.
This may be caused by an incorrect FRU header, inability to read the FRU header, or the FRU may not
be supported by this platform or Fabric OS version.
Recommended
Action
Verify that the FRU is valid for use in this system and this version of Fabric OS.
Reseat the FRU.
If this is a valid FRU and reseating does not solve the problem, replace the FRU
FABS-1015
Message []:Request to enable FRU type 0x,
unit failed. err code .
Message Type LOG
Severity ERROR
Probable Cause Indicates the specified FRU could not be enabled. This is usually an internal Fabric OS problem.
Recommended
Action
Remove and reinsert the FRU.
Reboot or power cycle the CP or system.
If the message persists, run the firmwareDownload command to update the firmware.