Dell POWEREDGE M1000E - Manual (Page 597)

Fabric OS Message Reference 575
53-1002749-01
IPS-1001
5
IPS Messages
IPS-1001
Message FTR_AFA/FTR_AE License Not Installed ().
Message Type LOG
Severity WARNING
Probable Cause Indicates that either Advanced FICON Acceleration (FTR_AFA) or Advanced Extension (FTR_AE)
license is not installed or assigned to the slot.
Recommended
Action
Run the licenseShow command to verify the slot-based licenses are installed on the switch. Contact
your switch supplier for an appropriate slot-based license. Run the licenseAdd and licenseSlotCfg
commands to add the license to your switch and activate it.
IPS-1002
Message Failed to initialize rc = .
Message Type LOG
Severity ERROR
Probable Cause Indicates that the initialization of a module within the IPS daemon failed.
Recommended
Action
Download a new firmware version using the firmwareDownload command.
IPS-1003
Message
: Failed to allocate memory while performing .
Message Type LOG
Severity WARNING
Probable Cause Indicates that memory resources are low. This may be a transient problem.
Recommended
Action
Check the memory usage on the switch using the memShow command.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.