Dell POWEREDGE M1000E - Manual (Page 345)

Fabric OS Message Reference 323
53-1002749-01
FABS-1007
5
FABS-1007
Message : Media state is invalid - status=.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the Fabric OS has detected an invalid value in an object status field. This is usually an
internal Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the firmwareDownload command to update the firmware.
FABS-1008
Message : Media oid mapping failed.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the Fabric OS was unable to locate a necessary object handle. This is usually an internal
Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.
FABS-1009
Message
: type is not media.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the Fabric OS was unable to locate an appropriate object handle. This is usually an internal
Fabric OS problem or file corruption.
Recommended
Action
Reboot or power cycle the switch.