Dell POWEREDGE M1000E - Manual (Page 214)

192 Fabric OS Message Reference
53-1002749-01
C2-1019
5
C2-1019
Message S,C: HW ASIC Chip TXQ FID parity error threshold reached
type = 0x.
Message Type LOG
Severity WARNING
Probable Cause Indicates that an internal error is observed in the application-specific integrated circuit (ASIC) hardware
that may degrade the data traffic.
Recommended
Action
Restart the system at the next maintenance window.
C2-1025
Message S,P(): Extra credit on
F_port:ftx= curr_cred= actual_cred=.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames.
Recommended
Action
When this error is observed persistently, replace the device.
C2-1026
Message S,P(): Faulting F_port due to extra
credit detected:ftx= curr_cred= actual_cred=credits>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the device is returning the wrong number of receiver-ready (R_RDY) frames.
Recommended
Action
When this error is observed persistently, replace the device.