Dell POWEREDGE M1000E - Manual (Page 145)

Fabric OS Message Reference 123
53-1002749-01
AG-1006
5
AG-1006
Message Access Gateway mode has been .
Message Type LOG
Severity INFO
Probable Cause Indicates that the Access Gateway mode has been enabled or disabled.
Recommended
Action
Execute the ag --modeshow command to verify the current status of the Access Gateway mode.
AG-1007
Message FLOGI response not received for the N_Port connected to the fabric.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the N_Port connected to the fabric switch is not online. The specified N_Port has been
disabled.
Recommended
Action
Check the connectivity between the Access Gateway N_Port and the fabric switch port.
AG-1008
Message Invalid Port Login (PLOGI) response from the fabric on the N_Port .
Message Type LOG
Severity WARNING
Probable Cause Indicates that the fabric switch management server did not accept the N_Port Login (PLOGI) request
sent by the Access Gateway.
Recommended
Action
Check the configuration of the fabric switch connected to the Access Gateway.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.