Dell POWEREDGE M1000E - Manual (Page 430)

408 Fabric OS Message Reference
53-1002749-01
FICN-1103
5
FICN-1103
Message DevTeraIngr:Exceptional Status rcvd on Path=0xDeviceDomain> state=0xstate> status=0x.
Message Type LOG
Severity INFO
Probable Cause Indicates that the status (0x0D or 0x05) indicating the device is going down was received from the device
or error status (including Unit Check 0x02) is received from an active emulation device.
Recommended
Action
The device doing down is a normal event during pipelining and not the unit check. If there are associated
I/O error messages with this event, contact your vendor's customer support for assistance.
FICN-1104
Message DevTeraEgr:Device Ready on Path=0xDeviceDomain>.
Message Type LOG
Severity INFO
Probable Cause Indicates the Teradata device has been initialized and is ready for emulation operations.
Recommended
Action
No action is required.
FICN-1105
Message
DevTeraIng:LRJ received on Path=0xDeviceDomain> lastCmds=0xreceived from the channel for this device> lastStatus=0xpresented to the channel for this device> treating as system reset event.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel does not have a
path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.