Dell POWEREDGE M1000E - Manual (Page 410)

388 Fabric OS Message Reference
53-1002749-01
FICN-1045
5
FICN-1045
Message HostTapeIng:FICON Purge received:Path=0xDeviceDomain>.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during the path recovery.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1046
Message HostTapeIng:LRJ received on Path=0xDeviceDomain> lastCmds=0xreceived from the channel for this device> lastStatus=0xpresented to the channel for this device> treating as system reset event.
Message Type LOG
Severity WARNING
Probable Cause Indicates that a Link Level Reject (LRJ) from a FICON channel indicates that the channel no longer has a
path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.
FICN-1047
Message
fcFicSetEmulation:Path=0xDeviceDomain> FDCB Not Idle state=0xemulation state of the FICON device> prevState=0xFICON device> set to state=0x.
Message Type LOG
Severity ERROR
Probable Cause Indicates there is an internal emulation error. This message should not be encountered.
Recommended
Action
This is an unexpected event; contact your vendor's customer support for assistance.