Dell POWEREDGE M1000E - Manual (Page 901)

Fabric OS Message Reference 879
53-1002749-01
XTUN-1000
5
XTUN Messages
XTUN-1000
Message FCIP Tunnel Missed Data frame:I/T/L:ID>//.
Message Type LOG
Severity ERROR
Probable Cause Indicates a missed frame with one or more Fibre Channel Protocol (FCP) data information units during a
SCSI write or read operation.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer support
for assistance.
XTUN-1001
Message FCIP Tunnel Memory allocation failed tracker that represents the calling source module>/.
Message Type LOG
Severity ERROR
Probable Cause Indicates a memory allocation failure.
Recommended
Action
Contact your vendor's customer support for assistance.
XTUN-1002
Message FCIP Tunnel Exchange timeout:I/T/L:/Target ID>/.
Message Type LOG
Severity ERROR
Probable Cause Indicates that the Fibre Channel Protocol (FCP) exchange has timed out.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer support
for assistance.