Dell POWEREDGE M1000E - Manual (Page 159)

Fabric OS Message Reference 137
53-1002749-01
AN-1004
5
Recommended
Action
If the port is an F_Port, examine the connected device for the source of the latency. If the port is a
long-distance E_Port, make sure that there are enough buffer credits to service the link distance.
AN-1004
Message Congestion bottleneck on port /.
pct. of period over which the percentage of affected seconds is reported> secs. affected.
Message Type LOG | AUDIT
Class FABRIC
Severity WARNING
Probable Cause Indicates that the volume of outgoing traffic at the specified port is too high for the capacity of the link.
Recommended
Action
Add more capacity on the path, using trunk links if possible.
AN-1005
Message Slot , port has
bottleneck cleared.
Message Type LOG | AUDIT
Class FABRIC
Severity INFO
Probable Cause Indicates that the bottleneck condition on the specified port has cleared.
Recommended
Action
No action is required.
AN-1006
Message Bottleneck detection configuration is successfully changed.
Message Type AUDIT
Class FABRIC
Severity INFO
Probable Cause Indicates that the bottleneck detection configuration has been changed.
Recommended
Action
No action is required.