Dell POWEREDGE M1000E - Manual (Page 317)

Fabric OS Message Reference 295
53-1002749-01
EM-1070
5
EM-1070
Message Slot is being powered on.
Message Type LOG
Severity INFO
Probable Cause Indicates that the blade in the specified slot is being intentionally powered on.
Recommended
Action
No action is required.
EM-1071
Message Unit in with ID is faulted, it is incompatible with the
following blade id(s): .
Message Type FFDC | LOG
Severity CRITICAL
Probable Cause Indicates that a blade inserted in the specified slot is incompatible with another blade in the system.
Recommended
Action
Determine which blade is essential to your configuration and remove blades that are incompatible with it.
EM-1072
Message Chassis cannot become ready since no Core Blades are available.
Message Type FFDC | LOG
Severity CRITICAL
Probable Cause Indicates that all core blades are either missing, faulted, or powered off. There must be at least one core
blade in enabled state for the chassis to be considered ready.
Recommended
Action
Insert and close the ejector switch on missing core blades. Reseat or replace core blades that are faulted
or powered off.