Dell POWEREDGE M1000E - Manual (Page 544)

522 Fabric OS Message Reference
53-1002749-01
FW-1438
5
FW-1438
Message Switch status change contributing factor Missing SFPs:
missing SFPs out of SFPs:config(
percent,). (Port(s) ).
Message Type LOG
Severity WARNING
Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of missing small
form-factor pluggable (SFPs) is greater than or equal to the policy set by the switchStatusPolicySet
command.
Recommended
Action
Execute the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty
ports.
FW-1439
Message Switch status change contributing factor Switch offline.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the switch is not in a healthy state. This occurred because the switch is offline.
Recommended
Action
Execute the switchEnable command.
FW-1440
Message state has changed to .
Message Type LOG
Severity INFO
Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to absent.
Recommended
Action
Verify that the event was planned.