Dell POWEREDGE M1000E - Manual (Page 398)

376 Fabric OS Message Reference
53-1002749-01
FICN-1009
5
FICN-1009
Message DevIng:CmdReject Sense Data rcvd:Path=0xDeviceDomain> LastCmds=0xissued to the device> Sense Data:Bytes0-0xB=0xdevice>the device>.
Message Type LOG
Severity INFO
Probable Cause Indicates a Unit Check status was received from a device and a sense command was issued to read the
sense data.
Recommended
Action
If there was a job failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1010
Message
DevDiskEgr:Device level exception flag found for Path=0xHostPort DeviceDomain>: Oxid=0xwas reported in the Device Level Exception Frame>.
Message Type LOG
Severity INFO
Probable Cause Indicates a Device Level Exception frame was received from the FICON channel.
Recommended
Action
If there was a job or I/O failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1011
Message DevDiskIng:XRC Incorrect RRS SeqNum Rcvd Path=0xDeviceDomain> Expected=0xnumber that was expected from the device> Received=0xwas actually received from the device> Oxid=0x.
Message Type LOG
Severity ERROR
Probable Cause Indicates the Control unit or device presented a Read Record Set Sequence number different from the
SDM's expected sequence number.
Recommended
Action
If there was an XRC volume or session suspended associated with this event, contact your vendor's
customer support for assistance.