Dell POWEREDGE M1000E - Manual (Page 880)

858 Fabric OS Message Reference
53-1002749-01
TRCE-1001
5
TRCE Messages
TRCE-1001
Message Trace dump available! (reason: trace dump: PANIC DUMP, WATCHDOG EXPIRED, MANUAL, TRIGGER>).
Message Type LOG
Severity WARNING
Probable Cause Indicates that trace dump files have been generated on the switch or the specified slot. The cause for the
dump can be one of the following:
• PANICDUMP: Generated by panic dump.
• WATCHDOG EXPIRED: Generated by hardware watchdog expiration.
• MANUAL: Generated manually by issuing the tracedump -n command.
• TRIGGER: Triggered by a specific Message ID generated by CRITICAL RASLog message.
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.
TRCE-1002
Message Trace dump automatically transferred to
address ' '.
Message Type LOG
Severity INFO
Probable Cause Indicates that a trace dump has occurred on the switch or the specified slot, and the trace dump files
were automatically transferred from the switch to the specified FTP server.
Recommended
Action
No action is required.
TRCE-1003
Message
Trace dump was not transferred due to FTP
error.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a trace dump has occurred on the switch or the specified slot, but the trace dump files were
not automatically transferred from the switch because of an FTP error such as a wrong FTP address,
FTP site is down, and network is down.