Allied Telesis AT-S62 - Manual (Page 77)

AT-S62 Management Software Menus Interface User’s Guide
Section I: Basic Operations 77
The System Hardware Information menu is shown in Figure 13.
Figure 13. System Hardware Information Menu
You cannot change the information in this menu. Note the following:
ˆ The number of fans vary by model. The AT-8516F/MT, AT-8516F/
SC, and AT-8524M switches have one fan, the AT-8524POE
switch has five fans, and the AT-8550GB and AT-8550SP switches
have two fans.
ˆ The Redundant Power Supply status will be “Not Present” if the
switch is not connected to an RPS unit. if the switch is connected
to an RPS unit, the status will be “On,” even when the RPS module
itself is powered off.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
System Hardware Status
System 1.8V Power ............... 1.79V
System 2.5V Power ............... 2.53V
System 3.3V Power ............... 3.30V
System 5V Power ................. 5.07V
System Temperature (Celsius) .... 30C
System Fan 1 Speed .............. 4720 RPM
System Fan 2 Speed .............. Off
Main Power Supply ............... AC - On
Redundant Power Supply .......... Not Present
U - Update Display
R - Return to Previous Menu
Enter your selection?