Allied Telesis AT-S62 - Manual (Page 533)

AT-S62 Management Software Menus Interface User’s Guide
Section IV: Spanning Tree Protocols 533
The VLAN-MSTI Association Menu is shown in Figure 181.
Figure 181. VLAN-MSTI Association Menu
The fields in the table are defined below:
MSTI / CIST
Lists the CIST and existing MSTI IDs on the switch.
Associated VLANs
Specifies the VIDs of the VLANs associated with the CIST and MSTIs.
For instance, referring to the figure above, the VLANs with the VIDs 7
and 22 are assigned to MSTI 7.
Adding VLAN
Associations to an
MSTI
This procedure adds new VLANs associations to an MSTI while retaining
the existing associations. If you want to add VLAN associations but not
retain the existing ones, perform the procedure “Replacing VLAN
Associations to an MSTI” on page 534.
To associate a VLAN to an MSTI, do the following:
1. From the VLAN-MSTI Association Menu, type 1 to select Add VLANs
to MSTI Association.
The following prompt is displayed:
Enter the MSTI ID [0 to 15] ->
2. Enter the MSTI ID to which you want to associate a VLAN.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
VLAN-MSTI Association
MSTI/CIST Associated VLANs
------------------------------------------------------------
0
4
1,2
5 6
7 7,22
1 - Add VLANs to MSTI
2 - Delete VLANs from MSTI
3 - Set VLAN to MSTI association
4 - Clear VLAN to MSTI association
U - Update Display
R - Return to Previous Menu
Enter your selection?