Allied Telesis AT-S62 - Manual (Page 184)

Chapter 10: File System
184 Section II: Advanced Operations
d. Press any key to return to the File Operations menu.
5. To rename a system file, do the following:
a. From the File Operations menu, type 5 to select Rename File.
The following prompt is displayed:
Enter the source file name:
b. Enter the name of the file you want to rename.
The following prompt is displayed:
Enter the destination file name:
c. Enter the new name for the file.
You can enter a file name of up to 16 alphanumeric characters,
followed by a 3 letter extension. You must keep the same
extension.
The following message is displayed:
Please wait...
Press any key ...
d. Press any key to return to the File Operations menu.
6. To delete a system file, do the following:
a. From the File Operations menu, type 6 to select Delete File.
The following prompt is displayed:
Enter file name to be deleted:
b. Enter the name of the file you want to delete.
The following prompt is displayed:
Please wait...
Press any key ...
c. Press any key to return to the File Operations menu.
Note
Deleting the active boot configuration file causes the switch to use
its default settings the next time you reboot or power cycle the
switch, unless you select another active boot configuration file. For
instructions on how to change the active boot configuration file, see
“Setting the Active Boot Configuration File” on page 179.