Allied Telesis AT-S62 - Manual (Page 76)

Chapter 3: Basic Switch Parameters
76 Section I: Basic Operations
Viewing System Hardware and Software Information
The procedure in this section displays hardware and software information
about the switch. The information includes the switch’s serial number and
MAC address, as well as the status of the power supply and fan.
To display this information, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 52.
2. From the System Administration menu, type 1 to select System
Information.
The System Information menu is shown in Figure 12.
Figure 12. System Information Menu
You cannot change the information in this menu.
3. To display system hardware information, type H to select System
Hardware Status.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
System Information
MAC Address ..... 00:30:84:01:00:00 IP Address ....... 167.11.11.11
Model Name ...... AT-8524M Subnet Mask ...... 255.255.255.0
Serial Number ... S05525A023600000 Gateway .......... 0.0.0.0
System Up Time ... 6D:11H:47M:34S
Bootloader ...... ATS62_LOADER v1.2.0 Build Date ....... Nov 14 2005 15:56:24
Application ..... ATS62 v1.4.0 Build Date ....... Jan 13 2006 17:57:17
System Name ..... Production Switch
Administrator ... John Doe
Location ........ Bldg. 5, Floor 4
H - System Hardware Status
U - Uplink Information
R - Return to Previous Menu
Enter your selection?