Allied Telesis AT-S62 - Manual (Page 361)

AT-S62 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 361
Note
The switch does not use the ARP table to move packets through its
switching matrix. The switch refers to the table only when performing
a management function that involves interaction with another
network node.
Displaying the
ARP Table
To view the switch’s ARP table, perform the following procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 52.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 6 on page 57.
3. From the System Utilities menu, type 6 to select Networking Stack.
The Networking Stack menu is shown in Figure 124.
Figure 124. Networking Stack Menu
4. From the Networking Stack menu, type 1 to select Display ARP Table.
Allied Telesyn Ethernet Switch AT-8524POE - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Networking Stack
1 - Display ARP Table
2 - Delete ARP Entry
3 - Reset ARP Table
4 - Display Route Table
5 - Display TCP Connections
6 - Display TCP Global Information
7 - Delete TCP Connection
R - Return to Previous Menu
Enter your selection?