Allied Telesis AT-S62 - Manual (Page 639)

AT-S62 Management Software Menus Interface User’s Guide
Section VI: Port Security 639
Figure 220. Configure Port Security Menu #2
8. If you selected the Limited security mode for the port, do the following
to specify the maximum number of dynamic MAC addresses you want
the port to be able to learn:
a. Type 2 to select Threshold.
The following prompt appears:
Enter port security threshold: [1 to 255] -> 100
b. Enter the maximum number of dynamic MAC addresses you want
the port to be able to learn. The range is 1 to 255. The default is
100.
9. To set the intrusion action for a port in the limited security mode, do the
following:
a. Type 3 to select Intruder Action.
The following prompt is displayed:
Enter intruder action: (N-Discard, T-Trap, D-
Disable):
b. Select the desired action:
N - Discard: The port discards invalid frames. This is the default.
T - Trap: The port discards invalid frames and sends an SNMP
trap.
D - Disable: The port discards invalid frames, sends a SNMP
trap, and disables the port.
Allied Telesyn Ethernet Switch AT-8524M - AT-S62
Production Switch
User: Manager 11:20:02 02-Jan-2006
Configure Port Security
Configuring Port Security 4
1 - Security Mode ..................... Limited
2 - Threshold ......................... 100
3 - Intruder Action ................... Discard
4 - Port Participating ................ No
D - Set Default Port Security
R - Return to Previous Menu
Enter your selection?